Join Our Team

We’re looking for a few good people to join our family-oriented company. You can see the depth of our experience and the broad spectrum of services we provide on this site, so you know there is good work to be done here.  Our founding partners created an evolutionary succession process to ensure the continuation of JDRM Engineering and our management comes up through our ranks, so you know there’s opportunity and growth here. We asked our people to name the best things about working for JDRM and were told: established, relaxed/flexible, family-like, versatile. We’re a solid, good company to work with.

CAD Draftsman – Mechanical/Plumbing/Electrical

We are looking for an CAD draftsman with experience in Auto CAD and Revit for building system design/drafting. This person will provide drafting (AutoCAD/Revit) assistance to Senior Engineers in project design and production.

Requirements:

  • Basic drafting experience
  • Proficient with Auto CAD; Revit experience is beneficial
  • Experience in building systems (HVAC, plumbing or electrical) is beneficial
  • Compensation: Dependent on experience

 

Mechanical Engineer – General

We are looking for a mechanical engineer with experience working in the Commercial, Institutional and Health Care sectors. Experience with hvac, chilled/hot water piping system design, Energy Code(s) is preferred.

Requirements:

  • 3+ years experience
  • BS in Mechanical Engineering or Mechanical Engineering Technology
  • Ability to interpret and apply State, Federal and local Codes to system design
  • Proficient with AutoCAD, Revit experience is preferred
  • Experience in building hvac load calculations, duct/piping design and calculations
  • Compensation: Dependent on experience

 

Mechanical Engineer – Industrial

We are looking for a mechanical engineer with experience working in Industrial and/or process sectors. Experience with industrial ventilation, process piping, steam/condensate system design is preferred.

Requirements:

  • 5+ years experience
  • BS in Mechanical Engineering or Mechanical Engineering Technology
  • P.E. license is desired
  • Ability to interpret and apply State, Federal and local Codes to system design
  • Proficient with AutoCAD, Revit experience is preferred.
  • Experience with AutoCAD Pipe 3D is preferred
  • Experience in industrial duct/piping design, industrial ventilation design, process piping and steam/condensate system design
  • Field experience is desired
  • Compensation: Dependent on experience

 

Arc Flash Specialist – Electrical Safety

We are looking for individuals interested in electrical arc flash data entry and system analysis. Experience with SKM and general knowledge of electrical power distribution systems is preferred.

Requirements:

  • Proficient with AutoCAD, Revit experience is desired
  • Experience with data entry and SKM analysis software is desired
  • Compensation: Dependent on experience

Electrical Engineer – General

We are looking for an electrical engineer with experience working in the Commercial, Institutional and Health Care sectors. Experience with power distribution, lighting calculations and design, grounding and auxiliary system design is preferred.

Requirements:

  • 3+ years experience
  • BS in Electrical Engineering or Electrical Engineering Technology
  • Ability to interpret State, Federal and local Codes and apply to system design
  • Proficient with AutoCAD, Revit experience is preferred
  • Experience in electrical short circuit calculations is beneficial
  • Compensation: Dependent on experience

 

Electrical Engineer – Power

We are looking for an electrical engineer with experience working in the power distribution sector of the building design. Experience in the preparation of low, medium and high voltage distribution including; one-line diagrams, wiring/schematics, physical equipment arrangement, grounding, surge suppression,
substations, metering/protective relay schemes for medium and high voltage busses, circuit breakers and transformers. Experience in preparation of equipment/installation plans and specifications required.

Requirements:

  • 5+ years of experience
  • BS in Electrical Engineering or Electrical Engineering Technology
  • Ability to interpret State, Federal and local Codes and apply to system design
  • P.E. license is preferred
  • Experience in system short circuit/arc flash analysis is desired
  • Proficient with AutoCAD, Revit experience is preferred
  • Compensation: Dependent on experience

Technology Designer

We are looking for a technology system designer with experience working in the Commercial, Institutional, Health Care and Industrial sectors. Experience/knowledge with BICSI and industry standards for structured/fiber optic cabling practices and the design/specification of horizontal
structured cabling, pathways, backbone cabling and fire stopping. Must be familiar with BICSI/Industry standards for grounding practices and the design, specification and layout of Telecommunication equipment and distribution rooms.

Requirements:

  • 3+ years experience
  • Ability to interpret State, Federal and local Codes and apply to system design
  • Familiarity with telecommunications systems including; wired/wireless system design and specification, IP based access control systems, IP based closed circuit camera systems, sound systems, Audio/Video systems, clock/intercom/paging systems, nurse call systems is desired
  • Proficient with AutoCAD, Revit experience is preferred
  • Knowledge in/with wireless software design systems (Airmagnet, Ekahau, IBwave) is desired
  • BICSI membership is desired
  • BICSI RCDD certification is desired
  • InfoComm CTS or CTS-D certifications are beneficial

CAD/BIM Manager

We are looking for a CAD/BIM system manager to develop and administer CAD/BIM standards, provide CAD support and trouble shooting, organize the CAD environment, supply technical support for CAD/BIM software, provide support for plotting and electronic file submission, interact on project standards coordination with customers, provide training of in-house users, customization of CAD/BIM programs and content, Clean-up and establish project CAD reference files, Clean-up CAD files for project close-out and archiving.

Requirements:

  • 5+ years experience
  • Proficient with AutoCAD and Revit
  • Compensation: Dependent on experience

Think you would fit in and stand out?

Email your resume today to files@jdrm.com